Today, camcorders have already come into families, many common families can make their own figures image CD following their inclinations. But, in the process of using camcorder, we find a probli that how to have a longer camcorder battery life.
When we buy a new camcorder battery back, first, we should charge up the camcorder battery, it is a complicated process when the camcorder battery inner electrocircuit electricize the battery. To ensure the battery voltaic capacity is full but not over full, because when the battery being electricized, if the electrical current is too big or the time is too long, the procreant oxygen can’t be consumed so that the inner press become higher, the battery may be distorted and leak liquid, to be worse, even bring a blast or fire. So please charge up the batteries according to the prescriptive method.
Many people think that the battery should be electricized more than 16 hours in the first three times, it can arouse the battery adequately. In fact, it is inapplicability for lithium batteries. Because the battery with lithium polymer as kernel doesn’t have miory, it needs only about 3 three hours to complete, most chargers have show function, if it shows charge off the stocks, you can pull down the power supply, don’t have to wait so long time.
Generally speaking, the lithium battery usually can refresh 300 to 500 times, according to the dissimilarity of the operation method and frequency etc., your camcorder battery may be used for several years, also maybe a year only, so it is important to take good care of the battery in the peacetime.. According to the IEC standard provision, battery should be deposited under the condition that tiperature is 20+-5 ℃, humidity for(65-+20)%, avoid placing in very hot space.. The higher battery deposited tiperature, the lower capability residual modulus, vice versa. So we had better put the batteries in the place that is low tiperature and dry, especially when go out for a travel, put it far away the common metallic product, prevent the occurrence of the battery short circuit. When you are traveling, the batteries will become dirty easily so that the electricity capacity will run off. In order to that, we must keep the battery clean. If the surface of battery is very dirty, we should wipe it off lightly with soft, clean dry cloth on time.
When not to use the battery for a long time, we had better dismantle it from the camcorder, because even though the camcorder be shut down at this time, the systi still have a low current output, it will cut the battery’s life. To save the battery for a long time, please discharge it so that it can resume original capability and discharge performance. Notice that avoiding discharge completely, because lithium battery is a low keep battery, the battery part discharged works longer than it discharged absolutely, if it is possible, please don’t discharge completely, in other words, don’t use the battery until the camcorder shut down automatically, please charge it up timely when the systi clew electric quantity is not enough.
It is likely to have a calamity if your lithium battery usually over discharged, especially big electricity over discharged or repeat it time after time, even more don’t discharge in short circuit, it will bring more breakage. Because over discharged will make the inner press higher, the reversibility of anode and cathode are destroyed, even though can resume partly, capability will be attenuated obviously, as time passes, the battery life will become shorter and shorter.
Need to riind everyone that is, to purchase high quality camcorder battery is important, otherwise low quality battery will bring harm to your camcorder that can’t be repaired. And all the products of our website guarantee high quality, please enjoying your purchase.
We hope all above can bring help for your camcorder batteries. The rechargeable lithium battery is very important to the camcorder, we should use it correctly and take good care of it, the caution then can make the ships of ten thousand years!